| |
Amino Acids Analysis in Acid Gradient Condition |
 |
Application Notes:
11 underivatized amino acids (aspartic acid, glutamic acid, alanine, valine, methionine, isoleucine, cysteine, phenylalanine, histidine, lysine, and arginine) are separated by a Primesep 100 HPLC column by reversed-phase and ion-exchange mechanisms with LC/MS compatible conditions without the use of ion-pair reagents. The HPLC separation uses a TFA (trifluoroacetic acid) gradient in a mobile phase of water acetonitrile (MeCN, ACN with evaporative light scattering detection (ELSD).
Application Columns:
- Primesep® 100 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 100 stationary phase combines a hydrophobic chain and an acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 100 columns. Primesep 100 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 100 separates underivatized amino acids and amines by combining reversed-phase and ion-exchange mechanisms. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids are separated by reversed phase and ion exclusion. Inorganic cations can be separated by cation exchange. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
Complex Mixture of Acids, Bases, Amino Acids, and Neutral Compounds |
 |
Application Notes:
Primesep 100 separates a mixture of amino acids (tyrosine, phenylalanine), organic acids (benzoic acid, mandelic acid), amines (benzylamine, pyridine), and neutrals (benzonitrile, toluene) in one HPLC run by combining reversed-phase, cation-exchange, and polar interactions. The method is tunable and peak order can be changed significantly by adjusting acetonitrile and trifluoroacetic acid concentrations. The separation method uses a mobile phase mixture of water, acetonitrile (MeCN, ACN) and trifluoracetic acid (TFA) and compatible with UV, mass spec (LC/MS) and evaporative light scattering (ELSD) detection.
Application Columns:
- Primesep® 100 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 100 stationary phase combines a hydrophobic chain and an acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 100 columns. Primesep 100 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 100 separates underivatized amino acids and amines by combining reversed-phase and ion-exchange mechanisms. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids are separated by reversed phase and ion exclusion. Inorganic cations can be separated by cation exchange. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
 |
Application Notes:
Primesep 200 separates catecholamines in the catecholamine pathway in 10 minutes. Phenylalanine, tyrosine, DOPA, dopamine, norepinephrine, and epinephrine are baseline resolved by a combination of reversed-phase, ion-exchange, and ion-exclusion mechanisms. Excellent peak shape results with a mass spec compatible mobile phase of water, acetonitrile (MeCN, ACN) and trifluoracetic acid (TFA) with UV detection at 210 nm.
Application Columns:
- Primesep® 200 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 200 stationary phase combines a hydrophobic chain and a weakly acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 200 columns. Primesep 200 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 200 separates underivatized amino acids, amines, isomers and structurally related compounds by combining reversed phase and ion exchange. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids and diacids are separated by reversed phase and ion exclusion. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
Bufferless Ion Separation (BLIS™) Chromatography of Amino Acids (1) |
 |
Application Notes:
Application Columns:
- Primesep® 200 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 200 stationary phase combines a hydrophobic chain and a weakly acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 200 columns. Primesep 200 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 200 separates underivatized amino acids, amines, isomers and structurally related compounds by combining reversed phase and ion exchange. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids and diacids are separated by reversed phase and ion exclusion. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
HPLC Separation of Acidic, Basic and Zwitterionic Compounds on Special Columns for Retention of Polar Compounds |
 |
Application Notes:
Application Columns:
- Primesep® 100 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 100 stationary phase combines a hydrophobic chain and an acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 100 columns. Primesep 100 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 100 separates underivatized amino acids and amines by combining reversed-phase and ion-exchange mechanisms. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids are separated by reversed phase and ion exclusion. Inorganic cations can be separated by cation exchange. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
- Primesep® 200 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 200 stationary phase combines a hydrophobic chain and a weakly acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 200 columns. Primesep 200 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 200 separates underivatized amino acids, amines, isomers and structurally related compounds by combining reversed phase and ion exchange. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids and diacids are separated by reversed phase and ion exclusion. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
HPLC Separation of Compounds of Catecholamine Pathway |
 |
Application Notes:
The catecholamine neurotransmitters are amino acid derivatives of tyrosine. DOPA, tyrosine, phenylalanine, norepinephrine, epinephrine, and dopamine and baseline resolved on a Primesep 200 column. The HPLC separation uses a mobile phase of water, acetonitrile (MeCN, ACN), trifluoracetic acid (TFA) or ammonium formate and ultraviolet (UV) detection at 210 nm. Peak order and retention time can be changed by switching from TFA to ammonium formate in the mobile phase.
Application Columns:
- Primesep® 200 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 200 stationary phase combines a hydrophobic chain and a weakly acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 200 columns. Primesep 200 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 200 separates underivatized amino acids, amines, isomers and structurally related compounds by combining reversed phase and ion exchange. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids and diacids are separated by reversed phase and ion exclusion. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
HPLC Separation of Amino Acids, Bases, Acids, and Neutrals on Obelisc R |
 |
Application Notes:
Application Columns:
- Obelisc R columns are the first commercially available columns with Liquid Separation Cell technology (LiSC). With multiple patents pending, LiSC technology is based on a new chemical modification of silica gel pores that creates a liquid separation cell with its own charge characteristics, ionic strength, and hydrophobic properties. Like living cells which exist in equilibrium with the outside environment, liquid separation cells exist in constant equilibrium with the mobile phase. Obelisc R, for reversed phase, has reversed-phase character and can be used in traditional, reversed-phase type applications. Due to the presence of ionic groups and a long hydrophobic chain, Obelisc R offers additional retention and tuning that is not available with traditional reversed-phase columns. Reversed-phase separations are augmented by additional ionic and polar interactions not available on traditional reversed-phase C18 columns. Mobile phase composition changes the conformation of the long hydrophobic chain and affects the properties of the liquid separation cell and changes separation selectivity. Typical mobile phases used with Obelisc R columns are based on acetonitrile, water, and the mass spec compatible buffers ammonium formate (pH 3) and ammonium acetate (pH 5). If it is necessary to detect in low UV (<220 nm) then phosphate buffer is recommended. Obelisc R columns are compatible with mass spectrometers (LC/MS), evaporative light scattering detectors and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
Effect of both pH and Organic Content on a Separation of Sugars, Amino Acids, and Carboxylic Acids |
 |
Application Notes:
Application Columns:
- Obelisc N columns are the first commercially available columns with Liquid Separation Cell technology (LiSC). With multiple patents pending, LiSC technology is based on a new chemical modification of silica gel pores that creates a liquid separation cell with its own charge characteristics, ionic strength, and hydrophobic properties. Like living cells which exist in equilibrium with the outside environment, liquid separation cells exist in constant equilibrium with the mobile phase. Obelisc N, for normal phase, has very polar characteristics and works well for polar and charged analytes. In ion-exchange mode, charged analytes interact with oppositely charged groups on the stationary phase. In traditional HILIC mode, a charged or neutral polar analyte interacts with a water layer on the polar stationary phase surface. On Obelisc N the charges are greatly separated and independently accessible which results in different selectivity compared to traditional HILIC and silica columns. Mobile phase composition changes the conformation of the long hydrophilic chain. This affects the properties of the liquid separation cell and changes separation selectivity. Typical mobile phases used with Obelisc N columns are based on acetonitrile, water, and the mass spec compatible buffers ammonium formate (pH 3) and ammonium acetate (pH 5). If it is necessary to detect in low UV (<220 nm) then phosphate buffer is recommended. Obelisc N columns are compatible with mass spectrometers (LC/MS), evaporative light scattering detectors and preparative chromatography (prep HPLC) system.
Application Analytes:
Application Detection:
|
HPLC Separation of Amino Acids on Obelisc R Column |
 |
Application Notes:
Application Columns:
- Obelisc R columns are the first commercially available columns with Liquid Separation Cell technology (LiSC). With multiple patents pending, LiSC technology is based on a new chemical modification of silica gel pores that creates a liquid separation cell with its own charge characteristics, ionic strength, and hydrophobic properties. Like living cells which exist in equilibrium with the outside environment, liquid separation cells exist in constant equilibrium with the mobile phase. Obelisc R, for reversed phase, has reversed-phase character and can be used in traditional, reversed-phase type applications. Due to the presence of ionic groups and a long hydrophobic chain, Obelisc R offers additional retention and tuning that is not available with traditional reversed-phase columns. Reversed-phase separations are augmented by additional ionic and polar interactions not available on traditional reversed-phase C18 columns. Mobile phase composition changes the conformation of the long hydrophobic chain and affects the properties of the liquid separation cell and changes separation selectivity. Typical mobile phases used with Obelisc R columns are based on acetonitrile, water, and the mass spec compatible buffers ammonium formate (pH 3) and ammonium acetate (pH 5). If it is necessary to detect in low UV (<220 nm) then phosphate buffer is recommended. Obelisc R columns are compatible with mass spectrometers (LC/MS), evaporative light scattering detectors and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
HPLC Separation of Phenylalanine, Glucosamine, and Tryptophan on Mixed-Mode Column |
 |
Application Notes:
Application Columns:
- Primesep® 100 is a mixed-mode HPLC column with general hydrophobic and ion-exchange properties. The Primesep 100 stationary phase combines a hydrophobic chain and an acidic functional group as a cation exchanger. Acids, bases, zwitterions and neutrals can be retained and separated by Primesep 100 columns. Primesep 100 retains hydrophobic compounds by reversed-phase retention alone or a combination of reversed-phase and ion-exchange retention. Primesep 100 separates underivatized amino acids and amines by combining reversed-phase and ion-exchange mechanisms. In this case the acidic functional group acts as an embedded ion-pairing reagent. Organic acids are separated by reversed phase and ion exclusion. Inorganic cations can be separated by cation exchange. Methods can be developed on Primesep columns that are fully compatible with detectors such as UV, RI, conductivity, fluorescence, evaporative light scattering (ELSD) as well as mass spectrometers (LC/MS) and preparative chromatography (prep HPLC) systems.
Application Analytes:
Application Detection:
|
|
|
